Leave Your Message
Featured Series
Fire retardant fiberglass grating — also known as FRP (Fiber Reinforced Polymer) grating — is a composite structural material manufactured by embedding continuous glass fiber rovings into a thermosetting resin matrix. The resulting product delivers exceptional mechanical strength while remaining inherently resistant to corrosion, chemicals, and open flame propagation.
Unlike conventional steel or aluminum grating, fire retardant FRP grating incorporates halogenated or non-halogenated flame-retardant additives directly into the resin system during the pultrusion or molded manufacturing process. This ensures that the material does not sustain combustion when exposed to ignition sources — a critical requirement in chemical processing plants, acid treatment facilities, and industrial filtration systems where flammable vapors or reactive substances are present.
Fire retardant FRP grating is produced via two primary methods: hand lay-up molded grating and pultruded grating. Molded grating offers bi-directional strength and is ideal for chemical filtration flooring, while pultruded grating provides higher unidirectional load capacity suited for walkways and platforms in acid processing environments.
Industrial chemical plants and acid filtration facilities routinely handle volatile organic compounds, concentrated sulfuric acid, hydrochloric acid, and other highly reactive substances. A single ignition event can escalate into catastrophic facility damage. Fire retardant FRP grating provides a passive fire protection layer — slowing flame spread, reducing smoke generation, and buying critical evacuation time. Its self-extinguishing properties are non-negotiable in ATEX-classified zones and chemical storage areas.
FRP grating with vinyl ester resin demonstrates superior resistance to:
Engineering properties that make fiberglass grating the preferred choice for industrial chemical and acid filtration infrastructure
FRP grating does not rust, corrode, or degrade when exposed to acids, alkalis, salts, or solvents — eliminating the maintenance burden and premature failure common with steel grating in chemical environments.
Meets ASTM E84 Class 1 / Class A flame spread rating. Self-extinguishing resin systems prevent flame propagation, making it compliant with OSHA, NFPA, and international chemical facility fire codes.
Approximately 75% lighter than steel grating while maintaining comparable load-bearing capacity. Reduces structural support costs and simplifies installation in elevated platforms and mezzanine filtration systems.
Inherently non-conductive, providing critical electrical insulation in electroplating facilities, battery acid handling areas, and chemical processing zones where grounding hazards exist.
No painting, coating, or galvanizing required. FRP grating maintains structural integrity for 20+ years in aggressive chemical environments, delivering significant lifecycle cost advantages over metallic alternatives.
Available in standard and custom panel sizes, mesh openings, bar depths, and resin systems. Tailored solutions for specific chemical filtration drainage requirements, load classes, and installation configurations.
Where fire retardant FRP grating delivers measurable performance advantages across critical industrial sectors
In chemical manufacturing facilities producing chlorine, sulfuric acid, phosphoric acid, or nitric acid, floor grating must withstand constant acid splash, vapor condensation, and thermal cycling. Fire retardant FRP grating serves as walkway flooring, trench covers, and equipment platforms — maintaining structural integrity where steel would corrode within months. Its open mesh design facilitates acid drainage while the fire retardant resin prevents ignition from exothermic chemical reactions nearby.
Municipal and industrial wastewater treatment plants handling acidic effluents require grating that resists biological fouling, chemical degradation, and moisture absorption simultaneously. FRP grating installed over neutralization tanks, sedimentation basins, and filtration beds provides safe access for operators while the fire retardant properties protect against methane gas ignition — a documented hazard in anaerobic digestion zones of wastewater facilities.
Lead-acid battery production and lithium-ion battery facilities involve concentrated sulfuric acid handling, hydrogen gas evolution, and electrical hazards simultaneously. Fire retardant, non-conductive FRP grating addresses all three risk factors in a single material solution — preventing acid corrosion of floor structures, eliminating electrical conductivity risks, and meeting fire safety codes in areas where hydrogen accumulation creates explosive atmosphere classifications.
GMP-compliant pharmaceutical facilities and fine chemical plants require flooring materials that are chemically inert, cleanable, and fire-safe. FRP grating with smooth top surfaces or anti-slip grit coatings meets cleanroom-adjacent requirements while resisting solvent exposure from acetone, ethanol, methanol, and specialty reagents. The non-sparking, non-conductive nature of FRP grating is essential in solvent handling areas classified under ATEX/NEC hazardous area standards.
Coastal desalination plants and large-scale water filtration facilities face simultaneous exposure to seawater chloride corrosion, chemical dosing agents (chlorine, coagulants, scale inhibitors), and UV radiation. Fire retardant FRP grating installed on pump platforms, filter bed covers, and chemical dosing areas provides a 20+ year maintenance-free service life that steel grating cannot match in marine-chemical combined environments.
Offshore platforms and onshore refineries require grating that simultaneously resists hydrocarbon exposure, saltwater corrosion, and fire hazards from volatile organic compound releases. Fire retardant FRP grating certified to ASTM E84 Class 1 is widely specified in refinery secondary containment areas, chemical injection skids, and acid gas scrubber platforms — where the combination of chemical resistance and fire retardancy is mandated by process safety management regulations.
The global FRP grating market is undergoing rapid transformation driven by industrial safety regulations, sustainability mandates, and expanding chemical sector investment
Global chemical plant operators are accelerating the transition from galvanized steel to FRP grating as lifecycle cost analysis consistently demonstrates 40–60% lower total cost of ownership over 15-year periods. Stricter environmental regulations on zinc runoff from galvanized steel are further driving this substitution trend across European and North American markets.
Post-incident regulatory responses in chemical manufacturing regions — particularly in Asia, the Middle East, and Latin America — are mandating fire retardant material specifications for industrial flooring and structural components. NFPA 820, EN 13501, and regional equivalents increasingly require Class 1 flame spread ratings for grating in chemical and acid handling environments, directly expanding the certified FRP grating market.
The green chemistry movement is driving demand for non-toxic, long-life infrastructure materials. FRP grating's elimination of anti-corrosion coatings, reduced replacement frequency, and compatibility with chemical-free cleaning protocols align with ISO 14001 environmental management objectives — positioning fire retardant FRP as the sustainable infrastructure choice for next-generation chemical facilities.
The explosive growth of electric vehicle battery manufacturing — particularly lithium iron phosphate (LFP) and NMC battery gigafactories — is creating massive new demand for acid-resistant, fire-safe industrial flooring. Battery precursor chemical plants processing lithium hydroxide, cobalt sulfate, and nickel sulfate solutions represent a high-growth application segment for fire retardant FRP grating through 2030 and beyond.
Industrial procurement is increasingly conducted through digital platforms, with engineering specifications, material certifications, and custom configurations managed online. Manufacturers with robust digital product libraries, downloadable technical data sheets, and responsive international logistics networks are capturing disproportionate market share as global chemical plant projects source FRP grating components internationally.
Advanced resin chemistry is expanding FRP grating performance envelopes. Phenolic resin FRP grating achieves Class 0 fire performance for the most demanding offshore and chemical plant applications. Emerging bio-based resin systems are being evaluated for sustainability-focused projects, while high-temperature vinyl ester formulations extend service temperature ranges for autoclave and high-temperature acid processing environments.
Shanghai Jinnuo Metal Products Co., Ltd. is a second-generation, family-owned enterprise founded in 1991, originally established as a general wire mesh manufacturer with a primary focus on stainless steel wire mesh production and sales.
Over three decades, Jinnuo has evolved from a specialized wire mesh producer into a comprehensive international metal and composite product supply complex. Today, the company operates dedicated welding workshops, punching workshops, weaving workshops, and maintains a professional design team capable of delivering fully personalized product customization services.
With over 20 years of manufacturing and exporting experience, Jinnuo has built a global reputation for high-standard quality, professional customization capabilities, and responsive customer service — earning sustained recognition from industrial customers across more than 50 countries worldwide.
Contact UsHigh standard quality and professional product customization services have won recognition from global customers. Following sustained investment in facility expansion, Jinnuo now operates multiple specialized production workshops supported by an experienced engineering design team.
Our fire retardant fiberglass grating product line is engineered to meet the most demanding industrial chemical and acid filtration requirements — backed by rigorous quality control, internationally recognized material certifications, and a customer-centric approach to technical problem-solving.
With over 20 years of manufacturing and exporting experience, Jinnuo has evolved from a single stainless steel mesh manufacturer into a full-spectrum international metal and composite product supply partner — delivering solutions that combine performance, safety, and long-term value for chemical processing, acid treatment, and industrial filtration infrastructure worldwide.
View All Products
Our mission is to serve the industries we partner with. We are committed to continuous improvement, friendly personal service, and working collaboratively with our customers to develop the endless possibilities of fire retardant FRP grating products for chemical and acid filtration applications.
Request a Quote — Inquiry NowExplore our full portfolio of industrial grating and filtration infrastructure solutions
Our mission is to serve the industries we work with. We are committed to continuous improvement, a friendly and personal service approach, and working with you — our customers — to develop the endless possibilities of our fire retardant fiberglass grating and industrial filtration products.
Whether you require standard fire retardant FRP grating specifications or fully customized solutions engineered for your specific chemical or acid filtration application, our technical team is ready to provide expert guidance and competitive quotations.
Inquiry Now
